|
| |
These
are the “original” hand-held digital pressure calibrators used in the
calibration of all types of pressure instrumentation including Pressure and DP
transmitters, I/P’s, P/I’s and dial pressure gauges. They all feature a 3.5
digit LCD display (0.55” high), battery operation (9 volt rechargeable
furnished with charger), soft vinyl carrying pouch and one-year calibration
certificate. Compact size: 5.75” X 3.60” X 1.12”.
|
|
Model OCi-003B.
Silicon
diaphragm model (clean, dry air or nitrogen service), uses a 30 psig
transducer and gives a choice of four different display ranges:
|
0-30.0
psig
|
0-19.99
psig |
| 0-830”wc |
0-199.9”wc. |
Accuracy:
0.1%
of selected range.
Model OCi-003B-SS
Same
as above except the diaphragm is 316SS. |
 |
Model
OCi-003D.
Silicon
diaphragm model (clean, dry air or nitrogen service), uses dual 30 psig
and 200 psig transducers and it gives a choice of four different display
ranges:
|
0-19.99
psig |
0-199.9
psig |
|
0-830”wc |
0-199.9”wc.
|
Accuracy:
0.1% of
selected range
Model
OCi-003D-SS
Same
as above except the diaphragm is 316SS.
Model
OCi-003DX
Same
as 003D-SS above except the high range transducer goes to 300 psig. The
display ranges are:
| 0-300
psig |
0-830”wc |
| 0-199.9
psig |
0-199.9”wc |
|
 |
Model
OCi-003L.
Very
low Differential Pressure Calibrator with silicon diaphragm. Features
HI/LO side ports (hose barbs) for applying up to 20 inches wc pressure.
Offers display selection of two ranges:
Max.
Overpressure: 10 psi
Accuracy:
1% of selected |
|
|
|
Model
PPS-04A.
Portable Pressure
Source generates test pressures up to 100 psig. Typically used for pumping
up air pressure to apply to the instrument being tested, and precisely
setting it with the vernier knob to within 0.1 inch.
|
|
